INNO IFS-15H FTTx FiberMaster SM MM Fusion Splicer
INNO IFS-15H FTTx Fiber Master Singlemode Multimode Fiber Core Alignment (New DACAS – Digital Analysis Core Alignment System) Fusion Splicer Kit
This Unit Has A Low Total Arc Count Of Only 46!
The IFS-15H FTTx combines the functions of both splicing and heating for those cables which are popular in FTTx: 250µm fiber, 900µm fiber, flat cable, fiber jumper and splice-on connector.
Includes 6 Month Fusion Splicer Care Kit (FS6MC)
– 4oz Flip Jar Of 99% Alcohol
– (50) Non-Lint Dry Wipes
– (6) Fiber Optic Wipes w/ 99% Alcohol
– 2oz Pump Fast Evaporating Mirror Spray
– (25) Camera Swabs
– (25) V-Groove Swabs
Includes INNO VF-15H High Precision Fiber Cleaver, Custom Hard Carrying Case and Accessories As Listed
IFS-15 H IFS 15H 15 IFS15H
Inno IFS-15H IFS15H Fusion Splicer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
IFS-15H FTTx Fiber Master
IFS-15H core-alignment fusion splicer
The IFS-15H core-alignment fusion splicer with the new (DACAS) Digital Analysis Core Alignment System is one of the most dependable splicer on the market. The IFS-15H has a user friendly, intuitive GUI (Graphical User Interface) with a 4.3 inch high-resolution color LCD screen that is easy to see and use. With a compact size of the fusion splicer (155mm*130mm*137mm) and the portable carrying case, the IFS-15H FTTH Master brings much more convenience for customers who works in the FTTx field. Besides the compact size, the most significant innovation is the compatibility. The IFS-15H is compatible with being widely used fibers and cables, even for splice-on connector. It combines the functions of both splicing and heating for those cables which are popular in FTTx: 250µm fiber, 900µm fiber, flat cable, fiber jumper and splice-on connector.
- Compact size with 1.82kg weight (without Battery)
- Splicing Method: DACAS (Digital Analysis Core Alignment System)
- Friendly smart GUI
- Quick optimize menu
- High precision splicing
- USB master port, easy to upgrade software
- Universal holder
- Replaceable SOC holder
- Replaceable SOC heating oven
- FTTH fitted package
Typically 150 cycles
IFS serves over 150 cycles of splicing. The battery capacity is 4200mAH. Also, the battery life will be demonstrated via 5 stage of battery indicator
Easy exchange of electrodes
The electrode does not require using screw driver. It can simply remove and replace with ones hand. Replacement procedure is following; Loosen screw located on electrode cover–>take electrode out of electrode cover (Electrode is fitted in electrode cover).
Easy to clean the mirror
Anti-fog treated mirror is included in IFS-15H. It does not require cleaning the mirror as replacement any parts. Easy maintenance of mirror gives better splicing results.
Heating oven with a zoom window
After splicing, it is clear to figure out sleeve processing. IFS-15H heat oven has a magnifying glass. Users can easily check the sleeve via magnifying glass window.
Bright LED for dark environment
LED light is enough bright to work in dark place. Users can find out thin optical fiber during working in dark environment.
Independent clamp motion
Both clamps are independent to adjust each other. If the clamp needs to be replaced, it can change one clamp not both.
IFS-15H monitor is protected by tempered glass LCD. Core image is clearly showed with the highest resolution 4.3 LCD monitor.
|Weight||1.82kg without battery|
|Compatible Fiber/Cable||0.25mm/0.9mm/2.0mm/2.4mm/3.0mm/ Flat cable|
|Fiber Count||Single Core|
|Fiber Holder||Replaceable (Standard: FH-40, Optional: FH-10, FH-ST, FH-SC)|
|Fiber Cleave Length||Diameter 250µm-1000µm: cleave length 8-16mm|
|Splice Mode||Max/Preset 64/24|
|Typical Splice Loss||SM:0.02dB/MM:0.01dB/DS:0.04dB/NZDS:0.04dB/G.657:0.02dB (ITU-T Standard)|
|Splicing Time||SM Quick Mode:7second|
|Estimated Splice Loss||Yes|
|Attenuation Splicing||0.1dB-20dB (0.1dB step)|
|Heat Oven/Heating Time||Heat Mode: 32/Heating Time (Typical): 35 second|
|10mm, 20mm, 30mm, 40mm, 50mm, 60mm|
|Results Storage||The last 2000 results|
|Mechanical Proof Test||1.96~2.25N [Based on the fiber count]|
|Operating Condition||Operating Altitude:0-5000meter above sea level, 95% relative humidity, – 10~50°C, Max Wind 15m/s|
|Storage Condition||0~95% relative humidity, -40~80°C, Battery: -20~ 30 °C|
|Size/ Color||155*130*137(L*W*H)/ Eco-green|
|Display||2 Cameras and 4.3 inch color LCD monitor (with high resolution and shock-proof protect surface)|
|Fiber View & Magnification||X/Y 300X, 180X|
|Power||DC 18V Power Supply|
|No of splice/Heating
|Typical 157 times(Splice + Heat) / Splice + Heat=26.7mA/per time Battery:4200mAh|
|Electrode||2500 Times Splicing|
|Terminal||USB 2.0/RS232 (for storage and upgrading)|
|Other Functions||IFS-15H Exclusive Software /Exclusive Heat Oven-for splice-on connector/Splice and Heat mode for connectors|
- INNO IFS-15H FTTx Fiber Master Core-Alignment Fusion Splicer (BC# 12043)
- Total Arc: 46
- INNO VF-15H High Precision Fiber Cleaver with Soft Case
- 6 Month Fusion Splicer Care Kit FS6MC:
- 4oz Flip Jar Of 99% Alcohol
- (50) Non-Lint Dry Wipes
- (6) Fiber Optic Wipes w/ 99% Alcohol
- 2oz Pump Fast Evaporating Mirror Spray
- (25) Camera Swabs
- (25) V-Groove Swabs
- DC300 Indoor Cable Stripper
- IFS-15H LBT-20 Battery Pack
- Spare Set of Electrodes
- Power Cable
- AC Adapter
- 12V CJ-11 Car Charger
- CG-22 Cooling Tray
- PT-1 Protector
- HL-1 Working Head Lamp
- User Manual on CD-ROM
- HCK-1 Working Table
- IFS-15H Custom Hard Carrying Case
& Tools. Sell or Trade Your Test Equipment. Fiber Optic Testers, Fusion Splicers, OTDRs, Cable Certifier Testers, CATV Meters, Site Masters, Spectrum Network Analyzers etc... $$ CASH back in your Pocket! $$ We make it Fast, Nice, & Easy!
Fill out Form to Submit Your Sell List